Solar Powered Outdoor Street & Yard Light 126 LED with Motion Sensor (52.5 × 15.5cm) – No DC

Illuminate driveways, pathways, perimeter fences, and outdoor yards automatically with the Solar Powered Outdoor Street & Yard Light with 126 High-Output LEDs & Motion Sensor (Large 52.5cm × 15.5cm Panel – No DC). Designed as a self-contained, zero-electricity floodlight, this all-in-one solar luminaire pairs a wide 126-LED SMD array with a responsive wide-angle Passive Infrared (PIR) motion detector and an oversized integrated polycrystalline solar panel.

Operating 100% off-grid on clean solar energy (No DC power adapter, hardwired electrical cables, or mains wiring required), it charges automatically under sunlight during the day and provides reliable security illumination from dusk to dawn. Built into a durable, weather-resistant ABS housing, it delivers substantial perimeter security and safety lighting for residential homes, lifestyle blocks, commercial yards, and rental properties without increasing electricity bills.

Key Features & Specifications

• Product Type: All-in-One Solar Street, Yard & Security Wall Light.

• Large Outdoor Profile Dimensions:

  • Size: Approx. 52.5 cm (Length) × 15.5 cm (Width).

  • Extended bar profile maximizes solar cell surface area and spreads LED beam coverage across wide exterior zones.

• High-Output 126 LED Optical Matrix:

  • Features 126 ultra-bright SMD LED chips behind a high-transmittance optical lens.

  • Delivers high-lumen, broad-area floodlighting with a wide 120-degree illumination angle to eliminate dark spots and blind corners.

  • Crisp daylight-white illumination (6000K–6500K) for high-definition security camera clarity and night visibility.

• Intelligent PIR Motion Sensor & Smart Lighting Modes:

  • Built-in wide-angle thermal infrared motion sensor detects movement up to 5 to 8 meters away across a 120° scanning arc.

  • Supports multiple intelligent operating modes:

    • Motion-Activated Full Power: Stays off or at low ambient brightness, jumping to 100% full illumination when motion is detected, then dimming/shutting off after ~20 seconds of no movement.

    • Constant Dusk-to-Dawn Mode: Automatically powers on at dusk at a steady, energy-saving output through the night.

• 100% Solar Powered & Energy-Independent (No DC):

  • Top-mounted high-efficiency polycrystalline photovoltaic panel continuously charges the internal battery under daylight.

  • Zero reliance on mains electricity grids, trenching, conduit, or external DC power adapters.

  • Zero operating running costs and 100% carbon-neutral outdoor lighting.

• Built-In High-Capacity Rechargeable Lithium Battery:

  • Heavy-duty internal lithium-ion / LiFePO4 battery pack stores ample reserve power to provide 8 to 12 hours of overnight lighting on a full sunny day's charge.

  • Integrated intelligent battery management system (BMS) prevents overcharging, over-discharging, and short circuits.

• All-Weather IP65 Rated Waterproof Housing:

  • Molded from high-impact, UV-stabilized ABS thermoplastic engineered to resist sun fading, cracking, frost, and high summer heat.

  • Fully sealed construction prevents moisture intrusion from heavy rain, driving wind, garden sprinklers, and outdoor dust.

• Versatile Wall or Pole Mounting:

  • Mounts directly flush to flat exterior walls, timber posts, shed cladding, or slips onto mounting poles/brackets using standard hardware.

Broad Universal Applications & Target Environments

• Perimeter Fences, Driveways & Gates: Mount along boundary lines and long rural driveways to greet arriving vehicles and deter trespassers.

• Garden Sheds, Stables & Barns: Ideal for off-grid outbuildings, tool sheds, and lifestyle block paddocks lacking mains electrical wiring.

• Garages, Carports & Alleys: Install above garage doors, side pathways, and dark alleyways for hands-free entry lighting when arriving home at night.

• Commercial Yards, Loading Bays & Warehouses: Cost-effective yard illumination for outdoor storage compounds and perimeter security boundaries without running high-voltage cable runs.

• Rental Homes & Baches: Simple screw-fastened exterior installation that provides instant security lighting without modifying permanent household wiring.

Quick 4-Step Setup & Installation Guide

1. Test & Pre-Charge: Place the light under direct sunlight for a full day before first use to ensure the lithium battery is fully saturated; press the master switch to test the sensor and LED array.

2. Choose Optimal Location: Select an unshaded exterior wall, eaves, or post facing north (or optimal sunlight exposure) at a recommended mounting height of 2.5 to 3.5 meters.

3. Secure Mounting Bracket: Fasten the mounting base securely into masonry, timber, or pole fixtures using the supplied expansion screws and bolts.

4. Select Mode & Align: Fasten the light to the bracket, select your preferred lighting/sensor mode via the onboard push button (or remote if supplied), and let the intelligent dusk-to-dawn sensor automate nightly lighting.

 

Specification

LED Number:42LED/84LED/126LED/168LED

Poower:20W/40W/60W/80W

Battery:1500mAh / 1500mAh / 3000mAh / 3000mAh

Color temperature:6500k

Lamp material:ABS

Waterproof:IP65

 

Product Features:

The use of high-quality LED wick, strong light, low energy consumption, after receiving sunlight during the day, can easily illuminate the night, ideal for home yard, garden and other places.

 

About the lighting model:

Moed 1:The light turns on when people come and turns off after 20 seconds of people leaving.

Moed 2:The light turns on when people come, and it turns on slightly after people leave for 20 seconds.

Moed 3:Medium light gear always bright mode

 

Product packaging:

1 * LED solar light

1 * Remote control

1 * A set of installation accessories

 

NOTE:

Be sure to read in detail for the first use:

1) Do a good job of cleaning the surface of the light: the protective film on the surface of the solar light needs to be removed for the first use, stains and shading will affect the efficiency of the solar panel;

2) in the sun for more than 5 hours: long-distance transportation in dark environment may lead to power depletion, so after receiving the goods, let the solar panel be irradiated in the sun for more than 5 hours before use.

(3) installed in the sunlight and no light source at night: to ensure the charging efficiency, solar energy installation needs to be selected towards the south direction tilt 30 degrees, solar energy to light-sensitive switches are generally automatically turned on at night, can not be installed in the solar energy lights around the place where there is a light source, because these sources of light will lead to the solar energy lights appear to automatically shut down the phenomenon, affecting the normal use of the solar energy lights.

4) Please do a good job of protecting the battery panel: avoid hard or sharp objects to hit the solar light battery panel, resulting in solar panel damage affecting the use.

5) Daily maintenance: every 2-3 months should clean the surface of the solar panel, so as to ensure that the charging efficiency of the solar light can reach the best.

 

3MODES MOTION SENSOR

Meet different usage scenarios

Induction angle（120°）

sensing range（10M）Moed 1:The light turns on when people come and turns off after 20 seconds of people leaving.

Moed 2:The light turns on when people come, and it turns on slightly after people leave for 20 seconds.

Moed 3:Medium light gear always bright mode

Installation instructions

1. Install expansion bolts

2. Install the screws to fix the base

3. Hang the light on the base

4. Set the working mode